Fake COTS Products

Aug 16
2010

An area that has experienced greater scrutiny since the advent of global terrorism has been the infiltration of fake and stolen COTS products into the supply chain. This initiative by terrorists has had three primary drivers:

  1. An “easy” way to generate large profits from an illicit enterprise in order to fund terrorist activities against US Warfighters and others
  2. The deployment of sub-quality products into the supply plain in order to cause business disruptions and economic harm to US firms
  3. The erosion of the value of brands and in turn the value of Intellectual Property (IP) rights; this can undermine the foundation of Western capitalism…but that is for another blog

The Organization for Economic Cooperation and Development estimates that 5-10% of world trade employs fake or stolen products. This is a serious problem that provides almost a limitless source of funds to terrorists, besides that of illegal drugs.

The Government and/or its contractors pay the following price for the need to secure the COTS product supply chain:

  • Higher insurance costs to mitigate the risks of “being stuck” with fake products or experience the thief of their product
  • Higher costs for the security of goods while in storage
  • Liabilities for branded products that fail and cause harm
  • Higher warranty expenditures for fakes
  • Overhead costs for providing surveillance of employee: espionage, bribery and theft
  • Authentication efforts to be able to validate the source of goods
  • Legal expenses to pursue wrongdoers

As COTS products continue to increase their presence in weapon systems, the above issues will have to be addressed by the Government and its contractors.

Changes Are A Comin’ to DoD Contractor Product Support

Aug 10
2010

The U.S. Department of Defense is the biggest purchaser of Product Support expenditures in the world; it annually buys an estimated $50 billion dollars worth of such goods and services.

The last ten years has proven to be an especially favorable period for military contractors; overall DoD spending has increased from $300 billion per year to $700 billion, or 130%, and America now employs nearly half of all global military resources.  It is estimated that Contractor Product Support expenditures rose at a 150% to 200% rate during the ten year period.

As a result of the large build-up in DoD expenditures, the US currently generates 50% of the global military expenditures, but the US economy only generates 25% of the global economic output…this imbalance will most likely be realigned back to a historical ratio of 1:1 between the US economic output and defense spending.  

When many contractors have only one customer that matters financially, options are limited as to generating additional sources of revenues to compensate for lost Product Support revenues.

Even the biggest military contractors claim less than five percent of the Pentagon’s budget, so a contractor’s fortunes is influenced more by how defense dollars are spent than by the size of the budget. For example, contractor revenues can decrease, even when military spending remains high, if money migrates out of weapon system acquisition and into uniformed and civilian manpower.

Below are some of the primary trends driving down Contractor Product Support expenditures:

  1. Reduction in overall weapon system OPTEMPO due to the scaling back the size of the US military deployment in SW Asia. With an estimated 25% of all weapon systems in theatre and their OPTEMPO an estimated 100% higher than those systems not in theatre, it is estimated that overall Product Support expenditures will decrease by 15%-20%, with contractors experiencing an estimated 20%-30% drop in Product Support revenues
  2. The current fiscal challenges of the Federal Government to finance all their budgeted programs will most likely result in the military being a “victim” of fiscal austerity. It is quite feasible that 15-20% of DoD weapon system inventories will be stored long-term in order to reduce Product Support expenditures. Given the US Congress and the power of the depot-lobby, many of the systems stored will be those currently primarily supported by contractors
  3. The emphasis that Secretary Gates has put on “rebalancing” the defense strategy. Rebalancing means putting less emphasis on conventional, industrial-age warfare, and more emphasis on non-traditional skills like counter-insurgency warfare; this strategy will reduce complex weapon systems that require a complex Product Support Enterprise. There will be more an emphasis upon COTS items being integrated into a solution for the warfighter. COTS Product Support expenditures are often materially less than that of Developmental Items, thus resulting in overall lower Product Support expenditures
  4. The move to “in-source” Product Support management jobs previously contracted out to industry by the Program Offices and Life Cycle Management Commands. The Government is actively recruiting “seasoned” professional from contractors; either the professionals join the Government or they lose their job.

Each of the major weapon system contractors will be encountering different Product Support issues:

  • Northrop Grumman (NG) has decided to remain primarily focused upon new weapon system deliveries. It recently sold its services unit, TASC, due to conflicts between its OEM business and its Product Support business. This was a major policy change for NG
  • General Dynamics (GD) has generated material Product Support revenues from Interim Contractor Support (ICS) programs for the communication communities, especially for weapon systems in theatre; a GD Contractor Field Service Representative (CFSR) in theatre generates almost $500,000 per year of revenue. Supplemental funds have been an engine of growth for GD Product Support programs; this will be going away sooner, rather than later
  • Raytheon is less exposed than other primary OEMs due to the nature of their products being electronics; Product Support expenditures, at least at the organizational maintenance level, is much smaller than that of weapon systems that have more mechanical parts
  • Lockheed Martin (LM) will encounter many challenges in the Product Support area. The company needs to generate $130 million in new sales every day just to stay where it is, and that won’t be easy in a down market for Product Support.

There will be many challenges in the area of DoD Product Support over the next few years. Adding value to DoD, rather than filling positions to perform routine Product Support tasks, will differentiate winners from losers. And let us not forget that Outcome Based Product Support programs will be the rule rather than the exception for all future Product Support contractor offerings; that will be the only way that DoD will be able to manage Product Support processes more effectively for less costs.

For a more detailed discussion on the above topic, review the recent conference discussions at the Lexington Institute.

Saving on COTS Parts – The Airline Industry’s Secret

Jul 14
2010

There are many ways to reduce the unit cost of parts employed in the Product Support Enterprise (PSE). Each industry sector end-users take a different approach at parts cost control, based upon the materiality of parts relative to overall costs. The airline industry is one sector that has identified parts as a major cost, specifically for jet engine Product Support; from parts employed in the organizational/line maintenance level process, to the overhaul process to the modification process.

An airline’s jet engine PSE can take the following steps at controlling the cost of parts:

  1. Acquire surplus new-condition parts directly from other airlines; bundled package of parts at large discount from list price
  2. Acquire not-new-condition parts from distributors: overhauled/ remanufactured, repaired and certified/as-is
  3. Acquire reversed engineered manufactured parts that are like-kind to that of original manufacturers; the FAA provides the manufacturers of these parts a Parts Manufacturer Authorization (PMA) in order to sell these parts
  4. Acquire and disassemble not-new-condition products for parts, also known as cannibalization
  5. Acquire new and not-new condition piece parts that are employed in a LRU and assemble LRU
  6. Develop multi-user LRU exchange pool with several user of same product; decrease depreciation of reparable LRUs

Aggressively finding ways to reduce parts cost can pay large dividends in reducing the Total Ownership Cost (TOC) of a product. Check out this Aviation Week story that touches on many of the points above.

The “Miracle” of COTS Products

Jul 09
2010

The Department Of Defense and its research organizations have always been touted as working on the “bleeding edge” of a multiple array of technologies. This is often true, leading to more effective (i.e. lethal) mission capabilities, but rarely are these initiatives more efficient (i.e. cost per outcome) in completing a mission.  See Undersecretary Carter’s comments regarding this issue here.

When we move to the COTS product world, the employment of COTS products in the processes of everyday life has resulted in both improvements in effectiveness and efficiency. In a recent article in the Journal of the American Enterprise Institute,  a striking comparison of what could be purchased in 1964 and today with the same purchasing power (price as a % of average salary) was illustrated below based upon an average one month salary.

1964:
 A moderately priced Radio Shack stereo system.

2010:
Panasonic Home Theater System, Insignia 50″ Plasma HDTV, Apple 8GB iPod Touch, Sony 3D Blu-ray Disc Player, Sony 300-CD Changer, Garmin Portable GPS, Sony 14.1-Megapixel Digital Camera, Dell Inspiron Laptop Computer, TiVo High-Definition Digital Video Recorder.

Also note that a personal computer in 1978, the Radio Shack Model 1, with 4K of RAM, a tape recorder as a data storage device, a green screen and little application software cost $600, or equivalent to about $3,000 today.

The above are stunning testimonials as to the value of COTS products and the inevitable greater and greater employment by DoD. Though our enemies have the same access to COTS products, it is the Acquisition corps that has to use their prowess at COTS product integration in developing solutions for the Warfighter. The US is second to none when it comes to integration and our enemies will never be able to duplicate our COTS products integration efforts resulting in our remaining the most efficient and effective military force of all time .

OEM PSE Profits -The Secret The Industry Doesn’t Know About

Jul 06
2010

Commercial OEMs create from 15% to 40% of their profits as a result of the revenues generated from each Product Support Enterprise (PSE) that employs their product. A PSE engages all the processes employed by a product end-user to: meet materiel availability levels, increase maintainability, assure capability, grow reliability, improve deployability and decrease costs. The remainder of an OEM’s profits is primarily derived from the sale of new-condition products, with the exception being those OEMs that have a financial arm.

When I have had nothing to do at 0400 on a Sunday morning, I have used that time “wisely” to dig into the Quarterly (10Q) or Annual (10K) Security and Exchange Commission (SEC) financial reports of capital goods OEMs in order to better understand the financial impact of PSEs upon their balance sheet….but I have been highly “disappointed” when virtually no information could be found to satisfy this longing of mine! I have reviewed close to 200 OEMs and I have developed a list below of only 13 OEMs who are willing to acknowledge, in even a minor detail, the existence of investments employed in PSEs.

When an OEM truly believes that being proactively engaged in PSEs is material to their financial health they often segment their balance sheet investments employed for PSEs. Note that for some OEMs, creating opaqueness in being engaged with PSEs is by design; they often do not want to indicate to their competitors that their business model is more like the razor-and-razorblade then one that focuses on the sale of the razor…but that is another story.

# OEM or Key Supplier Sector Financial Statement Description
1 AGCO Farm Balance Sheet: Current Assets Repair and Replacement Parts
2 NCR Office Balance Sheet: Current Assets Service Parts
3 Pitney Bowes Office Balance Sheet: Current Assets Supplies and Service Parts
4 Cognex Mfg. Automation Balance sheet: Long-term Assets Service Inventory
5 Ciena Data/Voice/Network Balance sheet: Long-term Assets Maintenance Spares Inventories
6 Diebold Specialty Balance Sheet: Current Assets Service Parts
Balance sheet: Long-term Assets Rotable Parts
7 KLA-Telcor Mfg. Semiconductor Balance Sheet: Current Assets Customer Service Parts
8 Rofin-Sinar Technologies Mfg. Automation Balance Sheet: Current Assets Service Parts
9 Faro Technologies Mfg. Automation Balance sheet: Long-term Assets Service Inventory
10 PAR Technologies Transactions Balance Sheet: Current Assets Service Parts
11 Terex Construction Balance Sheet: Current Assets Replacement Parts
12 Applied Materials Mfg. Semiconductor Balance Sheet: Current Assets Customer Service Spares
13 Wabash National Transportation: Trucks/Engines Balance Sheet: Current Assets Aftermarket Parts

The COTS Wagon Keeps On Rolling…But Is Anyone Watching?

Jul 02
2010

It is inevitable that the Services Acquisition Commands continue to focus on employing COTS products in the design of their new weapons systems and key infrastructure; this is aligned with the focus of Secretary Gates and Undersecretary Carter to reduce costs, but retain the military’s effectiveness.

Below are two recent acquisition initiatives at employing COTS products. I know of no DoD study that annually measuring the COTS content of new weapon systems…if there is none, one should be started.

1. The U.S. Navy’s Space and Naval Warfare Systems Command (SPAWAR) is placing orders under the Common Afloat Local Area Network Infrastructure (CALI). Under the CALI contracts, contractors will provide ships and submarines with Common Computing Environment (CCE) Components, Integrated Logistics Support (ILS), Configuration Management (CM), Test and Evaluation (T&E), Quality Assurance (QA), and Installation Support. Each contractor will deliver a secure, commercial-off-the-shelf (COTS) hardware, software and networking equipment. Each CALI contract has a total potential value of $502 million if all options are exercised. 

2. The Air Force is working on the Common Large Area Display Set (CLADS) acquisition program to replace aging CRTs in the Airborne Warning   And Control System (AWACS) aircraft with one of three flat-screen technologies: active matrix LCD (AMLCD), gas plasma, or a digital micro-mirror device. “The heart and soul of this is COTS, with some heavy ruggedization to operate under depressurization. The prices we`re seeing coming in the door are a third of what the old technology stuff now costs,” Bill Sirmon, a civilian contract negotiator at the Warner Robins Air Logistics Center at Robins Air Force Base, Ga. Aboard the AWACS now are CRTs that operate for about 300 hours between failures; the new products are planned to increase that operating time to 3,000 to 5,000 hours between failures.

Tweaking COTS Products To Become MOTS Products

Jun 07
2010

A Commercial Off The Shelf (COTS) product employed in a weapon system for economic or acquisition cycle time reasons, may not meet some of the more demanding requirements of the traditional military Developmental Item. Military Off The Shelf (MOTS) products are COTS products that meet the rigors of a Development Item. There are opportunities in which COTS products can become MOTS products as discussed below by Brig. Gen. Michael Brogan, Commander of the Marine Corps System Command (PEO for MRAP) during a NDIA conference.

“Acceleration is the most significant casualty-producing mechanism in our combat vehicles when hitting IEDs. Vehicles caught in a bomb blast experience two acceleration events: one is in an upward direction after the blast goes off. Its duration is between 40 to 50 milliseconds. The second event, when the vehicle returns to the ground and stops abruptly, is analogous to an automobile accident and last roughly 200 milliseconds.

That first 40-millisecond event is causing the majority of the casualties. People say automotive airbags can’t do that because they operate in that second event, that 200-millisecond event. Does it, or is that the way we’ve done that? In our litigious society, have we dumbed-down our airbags, have we slowed their speed of deployment to prevent the vehicle occupant from having his nose broken or glasses broken? Could we tune these up to get closer to that 40-millisecond event, recognizing that we would be accepting of minor injury to prevent much more serious injuries.”

The question is how many COTS products could be tweaked to become MOTS products….and can our enemies figure that out before we can…and as a result cause our warfighters harm?

Counterfeit COTS Parts

Jun 07
2010

With the advent of the increased employment of COTS parts in weapon systems, counterfeit commercial parts infiltrating its supply chain has become a concern for the US military community of Defense contractors, LCMCs, DLA and others. OEMs have historically struggled with the counterfeit issue due to IP concerns and its impact upon losing market share to the suppliers of counterfeit parts. For the military, the primary concern is its impact upon warfighter safety during a mission due to quality issues of the counterfeit part, as well as reliability issues resulting in decreased system availability due to higher failure rates of the counterfeit part. 

DoD is attempting to address the above issues through its Industrial Base Office. Thoughts?

http://www.bis.doc.gov/defenseindustrialbaseprograms/osies/defmarketresearchrpts/final_counterfeit_electronics_report.pdf

info@giuntinicompany.com

Tel: 570-713-4795